No Products in the Cart
The new Ping Glide 3.0 wedges have been completely redesigned to create a higher-spinning, more forgiving, softer-feeling, lighter overall design. The new Glide 3.0 wedge blends a players-style look at address with game-improvement performance. This year the Glide 3.0 is available in 4 grinds, including an EYE2 sand-wedge-inspired option, allowing fitters to properly match wedges to your angel of attack and most common turf conditions.
Ping Glide 3.0 Technology:
Improved Feel and Forgiveness - The Glide 3.0 wedges feature a larger, softer elastomer Custom Tuning Port covering more of the back of the face which activates upon impact, providing a soft, yet solid feel. This new design also helps expand the perimeter weighting, increasing MOI and positioning the CG higher to produce lower launching, higher spinning for more control.
Precision-Milled Grooves - Patented wheel-cut grooves have a sharper edge radius to increase interaction with the ball at impact creating more friction for improved spin and trajectory control. The higher lofted wedges also feature an extra 1/2 groove at the bottom of the face to further increase spin.
Players-Style Look - the Glide 3,0 wedge blend a classic, players-style look with game-improvement technology. At address, the wedge features the clean appearance of a tour-style wedge. Offset was then added based on tour feedback to produce a more captured look.
Full Shots - The grooves in the lower lofted wedges (46°- 52°) are milled with a 20° sidewall and a .005" edge radius for optimal full-shot performance.
Around the Green - The higher-lofted versions (54°- 60°) are milled to a .004" edge radius with a 28° sidewall to impart more spin, especially around the greens.
Lighter, More Control - The Glide 3.0 wedge's grip and shaft are now lighter. The Dyla-wedge Lite grip is 3/4 inch longer than a traditional grip, allowing you to choke down for more control. The new Ping Z-Z115 wedge shaft is made by Nippon and is custom engineered with a lower balance point closer to the tip to provide lower launch with more control and enhanced feel.
A larger, softer elastomer Custom Tuning Port insert covers more of the back of the face, activating at impact to produce a soft yet solid feel. The new cavity design and larger CTP expand the perimeter weighting to increase the MOI and position the center of gravity higher to yield lower-launching, higher-spinning trajectories for more control.
Patented wheel-cut grooves have a sharper edge radius to increase interaction with the ball at impact, creating more friction for improved spin and trajectory control. The higher-lofted versions (54°, 56°, 58° & 60°) feature an extra ½ groove at the bottom of the face to impart more spin, especially around the greens.
The Glide 3.0 wedge blends a players-style look with game-improvement technology. At address, it presents the clean appearance of a tour-style wedge. Offset was added based on tour player feedback to provide a more captured look.
This mid-bounce sole with heel relief will fit most golfers. Engineered for players with a moderate angle of attack. Provides exceptional performance in a variety of turf and sand conditions.
The most forgiving sole through the ground as it is round and cambered with significant bounce. Recommended if you have a steep angle of attack and you typically play in soft turf and sand conditions.
This grind matches founder Karsten Solheim's original groundbreaking Eye2 SW sole and face profile, offering a narrow hosel transition and progressive lead edge for the ultimate in bunker performance and touch shots around the green.
The Glide 3.0 wedge's grip and shaft are lighter, contributing to an overall weight reduction for the entire club. The Dyla-wedge Lite grip is ¾-inch longer than a traditional grip with reduced taper, allowing you to choke down for more versatility and trajectory control. The PING Z-Z115 wedge shaft is made by Nippon and custom engineered with a lower balance point closer to the tip to provide lower launch with more control and enhanced feel.
At Andrew Morris Golf we pride ourselves on our ability to custom fit golfers of all levels. We are very passionate about the custom fitting process. Our team of fitting professionals have several years of experience. We have all the current manufacturers in stock with full custom fitting components. The great thing about this is that we don’t push any particular brands, just the one that works best for you and your game.
In order to deliver the highest build quality all custom fit golf clubs are ordered from and built at the manufacturer's factory. This may take up 3 weeks from the time of order, however we will aim to deliver your custom fit clubs as soon as possible to ensure you are on the course improving your game in no time.
If you need any help or advice please don't hesitate to contact our team directly which includes a number of qualified PGA Professionals who are on hand to offer any expert advice you may need. You can contact our team of golf experts by calling the store directly on 02890 430 888 or else drop us an email using email@example.com.